Product Details:
|
Brand Name: | UBNT | Model Number: | RBSXTG-5HPacD-HGr2 |
---|---|---|---|
CPU Nominal Frequency: | 720 MHz | CPU Core Count: | 128 MB |
Dimensions: | 140x140x105mm | Max. Power Consumption: | 12W |
Storage Size: | 128MB | PoE In: | 802.3at |
Warranty: | 1 Year | ||
High Light: | 5GHZ Outdoor Wireless Surveillance System,Mikrotik Outdoor Wireless Surveillance System,RBSXTG-5HPacD-HGr2 |
Mikrotik 5GHZ Outdoor Wireless Surveillance System RBSXTG-5HPacD-HGr2
Overviews
The new High Gain version of the popular SXT G 802.11a/n/ac model, is equipped with an improved 5GHz 17dBi 24 degree antenna, Gigabit Ethernet port and RouterOS L4 license.
Like all of our SXT units, this is a clean, compact outdoor device that comes with all the necessary accessories included. Use it as a wireless AP, point-by-point, or as a CPE unit. 802.11ac technology provides data rates of up to 866Mbit, but also supports 802.11a/n.
The SXT HG supports 10-57V 802.3af/at and passive PoE power input.
* RBSXTG-5HPacD-HG (International) supports a range of 5150MHz-5875MHz (the specific frequency range may be limited by the country's regulations).
Includes:
* Gigabit PoE injector
* 24V 0.8A power adapter
* Metal ring (one)
* Pole mounting bracket
Specifications
CPU nominal frequency | 720 MHz |
CPU core count | 1 |
Size of RAM | 128 MB |
Dimensions | 140x140x105mm. Weight without packaging, adapters and cables: 265g |
10/100 Ethernet ports | None |
10/100/1000 Ethernet ports | 1 |
MiniPCI slots | 0 |
MiniPCI-e slots | 0 |
Wireless chip model | QCA9882-BR4A-R |
Wireless standards | 802.11a/n/ac |
Number of USB ports | 1 |
Power Jack | 0 |
Supported input voltage | 10 V - 57 V |
PoE out | No |
PoE in | 802.3at |
Voltage Monitor | Yes |
CPU temperature monitor | No |
PCB temperature monitor | Yes |
License level | 4 |
Antenna gain dBi | 17 |
Current Monitor | No |
CPU | QCA9557-AT4A-R |
Max Power consumption | 12W |
SFP ports | 0 |
SFP+ ports | 0 |
USB slot type | USB type A |
Number of chains | 2 |
Serial port | None |
Storage size | 128MB |
Storage type | NAND |
5 GHz | ||
---|---|---|
TX | RX | |
6MBit/s | 31 | -96 |
54MBit/s | 28 | -81 |
MCS0 | 30 | -96 |
MCS7 | 27 | -77 |
MCS9 | 22 | -72 |
wireless parameters may be limited in software, depending on your local regulatory limitations
RBSXTG-5HPacD-HGr2 | QCA9557 1G all port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 81.2 | 986.1 | 234.9 | 962.2 | 477.7 | 224.6 |
Bridging | 25 bridge filter rules | 81.2 | 986.1 | 118.4 | 485.0 | 119.5 | 61.2 |
Routing | none (fast path) | 81.2 | 986.1 | 234.9 | 962.2 | 408.2 | 209.0 |
Routing | 25 simple queues | 81.2 | 986.1 | 158.3 | 648.4 | 165.8 | 84.9 |
Routing | 25 ip filter rules | 64.8 | 786.9 | 70.4 | 288.4 | 60.9 | 31.2 |
* All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
* Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
* Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
* Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Contact Person: Helen
Tel: +8613590164558