Product Details:
|
Model Number: | TN12OBU103 | Wavelengths: | 1529 Nm To 1561 Nm |
---|---|---|---|
Complies With Standards: | IEEE 802.3ab | The Typical Gain: | 20 DB |
Optical-layer ASON: | Supported | Weight: | 2.50kg |
Warranty: | 1 Year | Basic Functionality: | PROVIDES DATA ACCESS AND SWITCHING FOR 48 GE PORTS |
High Light: | OptiX OSN Huawei Business Board,TN12OBU103 Huawei Business Board,CCC GPON Business Board |
HuaWei business board TN12OBU103 for OSN6800 OSN8800 new original package
Descriptions
1. OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the three modes supports carriers' distributed smooth investment based on the development of the
technology and industrial chain.
Based on a universal switch architecture, OptiX OSN equipment uses the packet transmission
technology to perform efficient statistical multiplexing on data services so the transmission cost
of every bit is reduced. In addition, OptiX OSN equipment uses the Native technology to transmit
TDM services so voice services are transmitted with high quality.
Based on a universal switch architecture, OptiX OSN equipment unifiedly transmits packet
services such as 2G, 3G, and VIP private line services so network overlapping is avoided. In
addition, OptiX OSN equipment transmits TDM services. Carriers can constitute an end-to-end
packet network, dual-domain (packet+SDH) network, or hybrid (MSTP+routers) network that bears L2+L3 services. This complete packet transmission solution allows an evolution from TDM networks to all-IP networks.
2. The OptiX OSN equipment uses the built-in WDM technology to transmit several wavelengths
over one optical fiber. In this manner, the OptiX OSN equipment can be interconnected with the
WDM equipment.
The OptiX OSN 1500 provides the built-in WDM technology. The functions of the equipment
are as follows:
• Standard DWDM wavelengths that comply with ITU-T G.694.1 can be added or dropped.
• Standard CWDM wavelengths that comply with ITU-T G.694.2 can be added or dropped.
• A set of equipment can be configured into an Optical Terminal Multiplexer (OTM) or an
Optical Add/Drop multiplexer (OADM), or both.
• Optical add/drop multiplexing boards have concatenation ports which can be used for
expansion or for adding/dropping multiple wavelengths through concatenation.
• The equipment supports Raman amplifiers which can be used in long-distance signal
transmission.
• The equipment supports the automatic gain control technology, which enables the gain of
each working wavelength to change within an allowed range in all scenarios.
• The equipment supports the forward error correction (FEC) technology, which can correct
the errors generated during signal transmission and therefore improve the tolerance of
signal-to-noise ratio at the receive end and extend the length of relay sections.
Specifications
Function and Feature | Description |
---|---|
Basic function |
|
Typical gain |
NOTE:
OBU1 Specifications only provides the value of nominal gain. Actual gain includes the noise, and the value is bigger than that of nominal gain. |
Online optical performance monitoring | Provides an in-service monitoring port (MON). This port connects to an optical spectrum analyzer or spectrum analyzer unit to monitor the spectrum and optical performance of the multiplexed signal without affecting traffic. |
Gain lock function | The EDFA inside the board has the gain lock function. Adding or dropping one or more channels or optical signal fluctuation does not affect the signal gain of other channels. |
Working mode |
Supports the gain locking and power locking modes.
|
Transient control function | The EDFA inside the board has the transient control function. When channels are added or dropped, the board can suppress the fluctuation of the optical power in the path so as to implement the smooth upgrading and expansion. |
Alarms and performance events monitoring |
|
Optical-layer ASON | All OBU1 boards except TN13OBU1P3: Supported
TN13OBU1P3: Not supported NOTE:
The TN11OBU1 board does not support the setting of Equalization Bas
|
FAQ
Q: Can we get samples?
A: Yes, but we need to charge a sample fee.
Q: Can you offer better prices? And discount?
A: Yes, Powerlink does not have a minimum order quantity, but different quantities have different prices.
Q: Can you take care of the goods?
Answer: If you wish, we will organize and arrange all the deliveries to your office.
Q: How about the payment item?
Answer: T/T, PAYPAL, Western Union.
Q: Delivery time?
A: Sample order, 3-5 working days. For larger orders, 5-8 working days after receiving the deposit.
Q: How long is your warranty period?
Answer: The warranty period is 12 months. This warranty does not cover damage caused by man-made damage, improper maintenance, improper use, negligence, normal wear and tear and force majeure (such as natural disasters, earthquakes, fires, etc.).
Our service
1. Strict quality control is carried out in every link from raw material procurement, processing, testing to packaging.
2. The waybill or bill of lading will be provided in time for tracking.
3. 12 months warranty
Welcome to visit our official website:http://www.oltont.com/
Contact 1:
Michelle Zhou:Wechat / Whats app : 0086 14704482226
Skype ID : toptoday-michelle@foxmail.com
Email: michelle@toptodaynetwork.com
Contact 2:
HELEN lin:Wechat/Whatsapp+8613590164558
Email:best-helen@foxmail.com/helen@toptodaynetwork.com
Contact 3:
Leven chen:Wechat / Whats app : 0086 13530306278
Email:leven@toptodaynetwork.com
Contact Person: Helen
Tel: +8613590164558